Fluorescence Upconversion Spectroscopy

Products in this application

Wavelength 1030 nm (1040, 1050 on request)
Average power >40 W
Pulse energy >40 uJ
Repetition rate up to 75 MHz
Pulse duraiton <200 fs
Wavelength 1560±10 nm
Pulse duration 50 fs to 5 ps
Average power 10 mW to 5 W
Repetition rate 65...100 MHz (fixed)
Wavelength 780 and 1560 nm
Average power >200/440 mW
Pulse duration <100 fs
Repetition rate 65 MHz
Wavelength range 730-970 nm
Pulse duration <50 fs
Average power >1 W
Repetition rate 80 MHz
Wavelength tuning range 715-990 nm
Pulse duration <100 fs
Average power >2.1 W
Repetition rate 80 MHz
Wavelength 1050 nm
Pulse duration 70...150 fs
Average power up to 12 W
Repetition rate 80 MHz
Wavelength 525 and 1050 nm
Average power >6 W/ >12 W
Pulse duration <100 fs
Pulse repetition rate 80 MHz
Pulse duration 35...140 fs
Tuning range 1230-1270 nm
Output power up to 800 mW
Pulse energy up to 20 nJ
Pulse repetition rate 30/96 MHz
The TOPOL-1050-C single-box optical parametric oscillator with 4 simultaneous channels
Tuning range 230-4750 nm
Pulse duration 130...250 fs
Average optical power up to 2 W
Repetition rate 80 MHz
Katusha FRONT
Wavelength 1050 / 525 / 800 nm
Average power 1 W / 300 mW / 300 mW
Pulse duration 200 / 200 / 100 fs
Repetition rate 80 MHz
Jitter between channels <1 fs
Input wavelength range 720-1600 nm
Output wavelength range 360-800 nm
Conversion efficiency 20-50%
Input pulse energy up to 10 mJ
Input frequency signal up to 2.8 GHz
PID bandwidth up to 2 MHz
High-voltage amplifier for PZT up to 50 W
PZT modulation bandwidth up to 200 kHz

Latest News

The TiF-100ST-F18-AU femtosecond high-power titanium-sapphire oscillator

Ti:S oscillator with up to 3 W output power at 100 fs

We have ramped up the maximum available output power for the TiF-100 series to more than 3 Watts at 800 nm, 100 fs, 80 MHz. The tuning range has also been extended to 720-950 nm, while an optional modification that covers 850-1040 nm is also available. The system features a high-power low-noise integrated DPSS laser […]

TiF-100ST-F6 femtosecond Ti:S oscillator with Frep locking for multiphoton microscopy at CANDLE, Armenia

The TiF-100ST-F6 femtosecond Ti:S oscillator with a built-in pump laser, also equipped with the ALock PLL electronics unit for pulse repetition rate locking to an external RF source has been installed at the Synchrotron Research Institute’s CANDLE facility in Armenia. The setup has been developed and commercialized during the joint Russia-Armenia project supported by FASIE (Innovation […]

Video