TiF-15. Ti:Sapphire Femtosecond Solid-State Oscillator

Ultrafast titanium-sapphire solid-state laser system with ultra-short pulse duration down to 12 fs.
  TiF-15SP-12 TiF-15SP-15 TiF-15SP-30 TiF-15SP-50 TiF-15SP-TU
Compressed  pulse duration with external compressor1),5) <12 fs <15 fs <30 fs <50 fs 15-50 fs (tunable)
Spectrum width (FWHM)1) >80 nm >60 nm >30 nm >18 nm 18-65 nm
Central wavelength tuning 800±15 nm (fixed) 790-820 nm 770-840 nm 750-860 nm 790-820 nm
(FWHM >65 nm)
750-860 nm (FWHM >18 nm)
Output power2) >230 mW
(3W pump)
>280 mW
(3W pump)
>350 mW (3W pump)
>470 mW (4W pump)
>400 mW (3W pump)
>530 mW (4W pump)
>300 mW@65 nm
(3W pump)
>530 mW@18 nm
(4W pump)
General optical specifications
Pulse repetition rate (fixed) 80±10 MHz
Pump laser integrated or stand-alone DPSS 532 nm low-noise laser (up to 4 W)
Beam mode TEM00
Beam diameter (at 1/e^2) <2 mm
Output polarization linear, horizontal, PER >20 dB
Beam divergence <1 mrad
Long-term stability2) <0.2% rms
Noise4) <0.1% rms
Physical dimensions (L × W × H)
Laser head dimensions 513 × 268 × 120 mm (including integrated pump laser)
Pump laser control unit dimensions 353 × 360 × 119 mm
Closed-loop chiller dimensions 430 × 340 × 190 mm
Environmental and utility specifications
Operating temperature 15-30 °C
Relative humidity <60%, non-condensing
Voltage single-phase; 100-240 VAC; 50/60 Hz
Power consumption <2 kW
Available configuration packages3)
Thermally stabilized monolithic body included in any package
Pulse train SMA output with mode-lock LED included in any package
“Auto” factory package - built-in spectrometer
- single-touch wavelength tuning w. presets
- built-in power meter
- active output power stability locking
- Windows software with configurable widgets
- automatic mode-lock start and monitoring
PC requirements: USB 2.0 port, Windows 10
"Basic" factory package (default) - mode-lock LED and push-button starter
- USB 2.0 wavelength tuning via step-motor slit (via step number information and calibration)
PC requirements: USB 2.0 port, Windows 10
“Manual” factory package - push-button starter
- manual wavelength tuning slit
1) - when tuned to 800 nm central wavelength;
2) - after 30 min warm-up with cold start, during 12-hour continuous operation under equal room temperature conditions using recommended stabilized closed-loop chiller with proper capacity and recommended low-noise on-board integrated highly stable pump laser with active power locking;
3) - please select one of the packages for your system; certain features may be tailored or combined differently according to specific customer requirements;
4) - measured from 10 Hz to 10 MHz;
5) - external compressor is not included.

The TiF-15 laser system offers the shortest available pulse duration in the TiF family of Ti:S femtosecond laser oscillators. It is a robust tool for cutting-edge ultrafast research.

The system can be supplied in two basic versions: the TiF-15, being a stand-alone version for pumping with an external pump laser; or the TiF-15F system which may be integrated with an industry-standard pump laser on site or at our factory. However, the dimensions of the Ti:S laser head are the same for either version, the stand-alone version may later be fitted with an integrated pump laser at minimum additional cost. The acceptable pump laser power for the TiF-15/TiF-15F is up to 4 W.

The system is designed to operate 24/7 as a seed oscillator for our larger amplifier systems and thus inherits all the stability-enhancing design features. The system may be supplied pre-tuned to one of the two available configurations, with all the components inside the box being the same.

An external prism pair or a tunable pulse compressor (the APC-Pro or APC-Kit units) for output pulse chirp compensation and pre-compensation are also available.

Related products

Latest News

Ultrafast Phenomena 2018 in Hamburg (15-20 July)

Avesta is participating in Ultrafast Phenomena 2018 conference and tabletop exhibition in Hamburg, Germany (15-20 July). We would be glad to discuss any of the ongoing and future projects with the ultrafast community at our tabletop. Hope to see you soon!

New Year Holidays: 30 Dec 2017 – 08 Jan 2018

Avesta’s facilities will be closed for the New Year break from 30 Dec 2017 till 08 Jan 2018. We will resume all operations on 09 Jan 2018. However, we hope to provide periodic e-mail correspondence during the holidays. We wish you a fruitful and prosperous Year 2018!