EFOA-SH. Femtosecond Er Fiber Laser with Built-in SHG
| EFOA-SH | EFOA-SH-HP | |
| Pulse width (FWHM) at 780 nm | <100* fs (typ. 85 fs) | <120 fs (typ. 100 fs) |
| Wavelength (fixed) | 780±5 nm and 1560±10 nm | |
| Repetition rate** (fixed) | 65±5 MHz or 80±5 MHz | |
| Outputs | ||
| Power output (switchable***), free-space | >140 mW at 780 nm >260 mW at 1560 nm |
>200 mW at 780 nm >440 mW at 1560 nm |
| Spatial mode | TEM00 | |
| Polarization | linear | |
| Service optical output | 1560 nm, FC/APC (~1 mW) | |
| RF sync output | SMA connector | |
| Mode-lock status | SMA connector (3.5/0 V) and LED | |
| General specifications | ||
| Operating temperature | 22±5 °С | |
| Warm up time for rated accuracy | 20 min | |
| Power supply | 110...220 V, 50/60 Hz | |
| Dimensions, mm | ||
| Laser head | 278x242x111 | 320x260x120 |
| Control unit | 291x202x134 | 470x385x160 |
| * - <80 fs pulse durations available upon request; ** - please indicate the necessary value when placing an order, 100 MHz available upon request; *** - simultaneous dual output is also possible upon request. |
||
Second harmonic of Er-doped fiber laser operates at wavelength of 780 nm and in a number of applications can replace the powerful but more expensive solid-state Ti:S lasers. Easy to use, featuring turn-key operation and small footprint, these lasers greatly facilitate any research. Lack of laser alignment experience is not a problem with these fiber lasers, as only general electronics and light physics knowledge is required to work with the unit.
The EFOA-SH is also a perfect source for amplifier system seeding due to one-box compact design and lack of expensive pump laser as in the case of Ti:S solid-state seed.
Related products
| Wavelength | 1030...1053 nm |
| Pulse duration | <200 fs...300 ps |
| Average power | 50 mW...20 W |
| Repetition rate | 70±10 MHz |
| Wavelength | 1030 nm (1040, 1050 on request) |
| Average power | >40 W |
| Pulse energy | >40 uJ |
| Repetition rate | up to 75 MHz |
| Pulse duraiton | <200 fs |
| Pulse duration | 50 fs...5 ps |
| Wavelength | 1560±10 nm / 780±20 nm |
| Output power | >200 mW |
| Repetition rate | 30-100 MHz (fixed) |
| Output | FC/APC or free-space |
| Wavelength | 1560±10 nm |
| Pulse duration | 50 fs to 5 ps |
| Average power | 10 mW to 5 W |
| Repetition rate | 65...100 MHz (fixed) |
| Input wavelength range | 450-3200 nm |
| Pulse duration range | 10 fs - 30 ps |
| Minimum input frequency | from 10 Hz |
| Sensitivity | 100 mW^2 |
Latest News
Ti:S oscillator with up to 3 W output power at 100 fs
We have ramped up the maximum available output power for the TiF-100 series to more than 3 Watts at 800 nm, 100 fs, 80 MHz. The tuning range has also been extended to 720-950 nm, while an optional modification that covers 850-1040 nm is also available. The system features a high-power low-noise integrated DPSS laser […]
TiF-100ST-F6 femtosecond Ti:S oscillator with Frep locking for multiphoton microscopy at CANDLE, Armenia
The TiF-100ST-F6 femtosecond Ti:S oscillator with a built-in pump laser, also equipped with the ALock PLL electronics unit for pulse repetition rate locking to an external RF source has been installed at the Synchrotron Research Institute’s CANDLE facility in Armenia. The setup has been developed and commercialized during the joint Russia-Armenia project supported by FASIE (Innovation […]