Attosecond and X-Ray Generation
Products in this application
| Tuning range | 740-970 nm |
| Pulse duration | <20-100 fs |
| Average power | up to 1 W |
| Repetition rate | 90±10 MHz |
| Wavelength tuning range | 750-860 nm |
| Pulse duration | <12...50 fs |
| Average power | 230...1300 mW |
| Repetition rate | 80 MHz |
| Pulse duration | <35 fs |
| Wavelength (fixed) | 800±15 nm |
| Peak power | up to 15 TW |
| Repetition rate | 10 Hz |
| Pulse energy | >550 mJ |
| Operating wavelengths | 800 and 515/1030 nm |
| Energy efficiency | up ot 40% |
| Compression ratio |
up to 15 |
| Output pulse duration (at 35 fs, 800 nm input) | <6 fs |
| Input frequency signal | up to 2.8 GHz |
| PID bandwidth | up to 2 MHz |
| High-voltage amplifier for PZT | up to 50 W |
| PZT modulation bandwidth | up to 200 kHz |
Latest News
Ti:S oscillator with up to 3 W output power at 100 fs
We have ramped up the maximum available output power for the TiF-100 series to more than 3 Watts at 800 nm, 100 fs, 80 MHz. The tuning range has also been extended to 720-950 nm, while an optional modification that covers 850-1040 nm is also available. The system features a high-power low-noise integrated DPSS laser […]
TiF-100ST-F6 femtosecond Ti:S oscillator with Frep locking for multiphoton microscopy at CANDLE, Armenia
The TiF-100ST-F6 femtosecond Ti:S oscillator with a built-in pump laser, also equipped with the ALock PLL electronics unit for pulse repetition rate locking to an external RF source has been installed at the Synchrotron Research Institute’s CANDLE facility in Armenia. The setup has been developed and commercialized during the joint Russia-Armenia project supported by FASIE (Innovation […]