Parametric Generation
Products in this application
| Available wavelengths | 320 nm - 10 um |
| Conversion efficiency | >10 % |
| Typical pulse duration | <250 fs |
| Wavelength tuning range | 715-990 nm |
| Pulse duration | <100 fs |
| Average power | >2.1 W |
| Repetition rate | 80 MHz |
| Wavelength | 1050 nm |
| Pulse duration | 70...150 fs |
| Average power | up to 12 W |
| Repetition rate | 80 MHz |
| Wavelength | 525 and 1050 nm |
| Average power | >6 W/ >12 W |
| Pulse duration | <100 fs |
| Pulse repetition rate | 80 MHz |
| Tuning range | 230-4750 nm |
| Pulse duration | 130...250 fs |
| Average optical power | up to 2 W |
| Repetition rate | 80 MHz |
| Pulse duration | <35 fs |
| Wavelength (fixed) | 800±15 nm |
| Peak power | up to 15 TW |
| Repetition rate | 10 Hz |
| Pulse energy | >550 mJ |
| Input frequency signal | up to 2.8 GHz |
| PID bandwidth | up to 2 MHz |
| High-voltage amplifier for PZT | up to 50 W |
| PZT modulation bandwidth | up to 200 kHz |
Latest News
Ti:S oscillator with up to 3 W output power at 100 fs
We have ramped up the maximum available output power for the TiF-100 series to more than 3 Watts at 800 nm, 100 fs, 80 MHz. The tuning range has also been extended to 720-950 nm, while an optional modification that covers 850-1040 nm is also available. The system features a high-power low-noise integrated DPSS laser […]
TiF-100ST-F6 femtosecond Ti:S oscillator with Frep locking for multiphoton microscopy at CANDLE, Armenia
The TiF-100ST-F6 femtosecond Ti:S oscillator with a built-in pump laser, also equipped with the ALock PLL electronics unit for pulse repetition rate locking to an external RF source has been installed at the Synchrotron Research Institute’s CANDLE facility in Armenia. The setup has been developed and commercialized during the joint Russia-Armenia project supported by FASIE (Innovation […]