Supercontinuum Generation
Products in this application
Wavelength | 1030 nm (1040, 1050 on request) |
Average power | >40 W |
Pulse energy | >40 uJ |
Repetition rate | up to 75 MHz |
Pulse duraiton | <200 fs |
Wavelength | 1560±10 nm |
Pulse duration | 50 fs to 5 ps |
Average power | 10 mW to 5 W |
Repetition rate | 65...100 MHz (fixed) |
Wavelength | 780 and 1560 nm |
Average power | >200/440 mW |
Pulse duration | <100 fs |
Repetition rate | 65 MHz |
Spectral coverage | 1100-2000 nm |
Average output power | >150 mW |
Repetition rate | 50...70 MHz |
Wavelength | 780/1560/1100-2000 nm |
Average power | 50/150/130 mW |
Repetition rate | 70 MHz |
Spectral range | 520-2200 nm |
Comb spacing (Frep) | 125 MHz |
Tuning range of offset frequency Fceo | >100 MHz |
Stability | 5*10^-13 in 1 s |
Wavelength tuning range | 715-990 nm |
Pulse duration | <100 fs |
Average power | >2.1 W |
Repetition rate | 80 MHz |
Wavelength | 1050 nm |
Pulse duration | 70...150 fs |
Average power | up to 12 W |
Repetition rate | 80 MHz |
Wavelength | 525 and 1050 nm |
Average power | >6 W/ >12 W |
Pulse duration | <100 fs |
Pulse repetition rate | 80 MHz |
Wavelength | 1050 / 525 / 800 nm |
Average power | 1 W / 300 mW / 300 mW |
Pulse duration | 200 / 200 / 100 fs |
Repetition rate | 80 MHz |
Jitter between channels | <1 fs |
Input frequency signal | up to 2.8 GHz |
PID bandwidth | up to 2 MHz |
High-voltage amplifier for PZT | up to 50 W |
PZT modulation bandwidth | up to 200 kHz |
Pump wavelength | 800 nm |
Conversion efficiency | up to 60% |
Spectrum (at -20 dB) | 380-1050 nm |
Latest News
28.07.2020
Ti:S oscillator with up to 3 W output power at 100 fs
We have ramped up the maximum available output power for the TiF-100 series to more than 3 Watts at 800 nm, 100 fs, 80 MHz. The tuning range has also been extended to 720-950 nm, while an optional modification that covers 850-1040 nm is also available. The system features a high-power low-noise integrated DPSS laser […]
02.09.2019
TiF-100ST-F6 femtosecond Ti:S oscillator with Frep locking for multiphoton microscopy at CANDLE, Armenia
The TiF-100ST-F6 femtosecond Ti:S oscillator with a built-in pump laser, also equipped with the ALock PLL electronics unit for pulse repetition rate locking to an external RF source has been installed at the Synchrotron Research Institute’s CANDLE facility in Armenia. The setup has been developed and commercialized during the joint Russia-Armenia project supported by FASIE (Innovation […]