Cold Ablation Techniques

Products in this application

Wavelength 1030 nm (1040, 1050 on request)
Average power >40 W
Pulse energy >40 uJ
Repetition rate up to 75 MHz
Pulse duraiton <200 fs
Central wavelength 800±20 nm (fixed)
Pulse energy from 50 uJ to 40 mJ
Pulse repetition rate up to 10 kHz
Pulse duration from 30 to 120 fs
Input wavelength range 720-1600 nm
Output wavelength range 360-800 nm
Conversion efficiency 20-50%
Input pulse energy up to 10 mJ
Input wavelength range 750-1600 nm
SH output wavelength 375-800 nm
TH output wavelength 250-533 nm
Conversion efficiency SH: 20-50%; TH: 3-15%
Input wavelength range 820-1600 nm
SH output wavelength 410-800 nm
FH output wavelength 205-400 nm
Conversion efficiency SH: 20-50%; FH: 3-10%
Input wavelength range 780-1600 nm
SH output wavelength 390-800 nm
TH output wavelength 260-533 nm
FH output wavelength 195-400 nm
Conversion efficiency SH: 30-60%; TH: 5-10%; FH: 1-10%

Latest News

The TiF-100ST-F18-AU femtosecond high-power titanium-sapphire oscillator

Ti:S oscillator with up to 3 W output power at 100 fs

We have ramped up the maximum available output power for the TiF-100 series to more than 3 Watts at 800 nm, 100 fs, 80 MHz. The tuning range has also been extended to 720-950 nm, while an optional modification that covers 850-1040 nm is also available. The system features a high-power low-noise integrated DPSS laser […]

TiF-100ST-F6 femtosecond Ti:S oscillator with Frep locking for multiphoton microscopy at CANDLE, Armenia

The TiF-100ST-F6 femtosecond Ti:S oscillator with a built-in pump laser, also equipped with the ALock PLL electronics unit for pulse repetition rate locking to an external RF source has been installed at the Synchrotron Research Institute’s CANDLE facility in Armenia. The setup has been developed and commercialized during the joint Russia-Armenia project supported by FASIE (Innovation […]

Video