Photomask Repair Solutions
Products in this application
| Wavelength | 1030 nm (1040, 1050 on request) |
| Average power | >40 W |
| Pulse energy | >40 uJ |
| Repetition rate | up to 75 MHz |
| Pulse duraiton | <200 fs |
| Average power | up to 20 W |
| Central wavelength | 1030 nm |
| Pulse energy | up to 2 mJ |
| Repetition rate | up to 1 MHz |
| Pulse duration | <270 fs |
| Input wavelength range | 720-1600 nm |
| Output wavelength range | 360-800 nm |
| Conversion efficiency | 20-50% |
| Input pulse energy | up to 10 mJ |
| Input wavelength range | 750-1600 nm |
| SH output wavelength | 375-800 nm |
| TH output wavelength | 250-533 nm |
| Conversion efficiency | SH: 20-50%; TH: 3-15% |
| Input wavelength range | 820-1600 nm |
| SH output wavelength | 410-800 nm |
| FH output wavelength | 205-400 nm |
| Conversion efficiency | SH: 20-50%; FH: 3-10% |
| Input wavelength range | 780-1600 nm |
| SH output wavelength | 390-800 nm |
| TH output wavelength | 260-533 nm |
| FH output wavelength | 195-400 nm |
| Conversion efficiency | SH: 30-60%; TH: 5-10%; FH: 1-10% |
Latest News
Ti:S oscillator with up to 3 W output power at 100 fs
We have ramped up the maximum available output power for the TiF-100 series to more than 3 Watts at 800 nm, 100 fs, 80 MHz. The tuning range has also been extended to 720-950 nm, while an optional modification that covers 850-1040 nm is also available. The system features a high-power low-noise integrated DPSS laser […]
TiF-100ST-F6 femtosecond Ti:S oscillator with Frep locking for multiphoton microscopy at CANDLE, Armenia
The TiF-100ST-F6 femtosecond Ti:S oscillator with a built-in pump laser, also equipped with the ALock PLL electronics unit for pulse repetition rate locking to an external RF source has been installed at the Synchrotron Research Institute’s CANDLE facility in Armenia. The setup has been developed and commercialized during the joint Russia-Armenia project supported by FASIE (Innovation […]