Automation of Complex Experimental Setups

Products in this application

ASF
This single-shot autocorrelator family is designed to measure a wide range of laser sources from ultrafast oscillators to amplifiers in single-shot and multiple shot accumulation mode. The system is also indispensable for real-time control and alignment of low repetition rate amplifier systems.
Wavelength range 400-2200 nm
Pulse duration range 5 fs...20 ps
Repetition rate single-shot...150 MHz
Sensitivity 1 uJ in single-shot mode
OA
Optical attenuators are used to attenuate laser radiation in a controlled manner. Models with thin-film polarizers, Glan prisms or polarizing beamsplitter cubes are available. The units are motorized or manually driven.
Operating wavelength 250...2000 nm
Transmission >90%
Dynamic range >10^2
Damage threshold up to 10 J/cm^2
Clear aperture up to 15 mm
ALock
A multipurpose re-configurable PLL-based platform that is suitable for various phase locking applications.
Input frequency signal up to 2.8 GHz
PID bandwidth up to 2 MHz
High-voltage amplifier for PZT up to 50 W
PZT modulation bandwidth up to 200 kHz
OG-B/F
Electro-optic pulse picker systems with fixed gate open time are used to select single pulses from a train of femtosecond pulses for numerous applications. The systems are also used for injection/ejection purposes in an ultrafast laser amplifier system, as well as for amplifier contrast improvement.
Possible operating wavelength range 200...2700 nm
Max. output rep. rate up to 1 MHz
Rise time down to 700 ps
Clear aperture up to 20 mm
Contrast ratio >1500:1
OG-V
The OG-V ultrafast pulse selector series have adjustable transmission gate time for selection of groups of adjacent pulses from a train of femtosecond pulses.
Possible operating wavelength range 200-2700 nm
Max. output rep. rate up to 100 kHz
Rise time 7 ns
Gate open time (adjustable) from 20 ns to 10 us
Contrast ratio >1000:1

Latest News

The TiF-100ST-F18-AU femtosecond high-power titanium-sapphire oscillator
28.07.2020

Ti:S oscillator with up to 3 W output power at 100 fs

We have ramped up the maximum available output power for the TiF-100 series to more than 3 Watts at 800 nm, 100 fs, 80 MHz. The tuning range has also been extended to 720-950 nm, while an optional modification that covers 850-1040 nm is also available. The system features a high-power low-noise integrated DPSS laser […]

02.09.2019

TiF-100ST-F6 femtosecond Ti:S oscillator with Frep locking for multiphoton microscopy at CANDLE, Armenia

The TiF-100ST-F6 femtosecond Ti:S oscillator with a built-in pump laser, also equipped with the ALock PLL electronics unit for pulse repetition rate locking to an external RF source has been installed at the Synchrotron Research Institute’s CANDLE facility in Armenia. The setup has been developed and commercialized during the joint Russia-Armenia project supported by FASIE (Innovation […]

Video