Single-Shot Femtosecond Pulse Duration Measurement
Products in this application
| Wavelength range | 400-2200 nm |
| Pulse duration range | 5 fs...20 ps |
| Repetition rate | single-shot...150 MHz |
| Sensitivity | 1 uJ in single-shot mode |
| Input spectral range | 550-1100 nm |
| Input pulse duration range | 5-320 fs |
| Input sensitivity | 100 mW at 100 MHz; 1 uJ in single-shot mode |
| Input pulse repetition rate | any |
Latest News
Ti:S oscillator with up to 3 W output power at 100 fs
We have ramped up the maximum available output power for the TiF-100 series to more than 3 Watts at 800 nm, 100 fs, 80 MHz. The tuning range has also been extended to 720-950 nm, while an optional modification that covers 850-1040 nm is also available. The system features a high-power low-noise integrated DPSS laser […]
TiF-100ST-F6 femtosecond Ti:S oscillator with Frep locking for multiphoton microscopy at CANDLE, Armenia
The TiF-100ST-F6 femtosecond Ti:S oscillator with a built-in pump laser, also equipped with the ALock PLL electronics unit for pulse repetition rate locking to an external RF source has been installed at the Synchrotron Research Institute’s CANDLE facility in Armenia. The setup has been developed and commercialized during the joint Russia-Armenia project supported by FASIE (Innovation […]